RADIATOR CLEAN

CLEANER FOR THE ENTIRE COOLING CIRCUIT

17.10

Dissolves all types of deposits from the entire cooling circuit:radiators, engine block, interior heating radiators .
Radiator Clean viene prodotto in confezioni da 500 ml.

  • effectively dissolves and cleans limescale, rust, grease, oil and all kinds of dirt;
  • compatible with all types of radiators and materials;
  • optimises cooling and prevents overheating.

Rust, oil, sludge, scale and old non-renewed antifreeze in the cooling circuit undermines correct cooling of the engine.
Radiator Clean eliminates all types of deposits from the entire cooling circuit: radiators, hoses, hoses, tubing, passenger compartment heaters etc.

It can be used on any type of radiators: does not damage the aluminium or alloys routinely used for constructing cooling systems.

Emulsifies residues of spent oil in the cooling circuits of malfunctioning engines, e.g. head gasket malfunctions, etc.

Use and dosage

  1. Empty the existing fluid from the circuit;
  2. replace it with water;
  3. add Radiator Clean and open the heating valve;
  4. run the engine for about 10 – 15 minutes at the normal operating temperature;
  5. scaling, oily sediment and rust will be removed;
  6. drain the radiator and rinse thoroughly with water (at least two cycles), at the normal operating temperature;
  7. introduce the new fluid into the radiator.

Dosage
The recommended dose is 50 – 100 ml per 1 litre of liquid coolant. The amount of product to use depends on the specific conditions of the radiator.

Datasheet

***

LEARN MORE