PROTECTOR RACING

ANTI-FRICTION TREATMENT FOR NEW AND RACING ENGINES.PREVENTS WEAR.

22.50155.00

Anti-friction protective coating based on nano PTFE with Friction Modifier.
Protector is produced in packs of 125 ml, 250 ml, 500 ml, 1000 ml.

Clear

Racing is the most extreme version of the Protector range, formulated to maximise smoothness and performance.Protector Racing achieves the maximum reduction of friction by coating and protecting the surfaces with an ultra-thin film of PTFE.
For the latest generation of engines or racing cars, not those that have been well worn out:

  • maximum friction reduction;
  • increases delivered power and torque;
  • extends engine life.

Ideal for new engines, and with precision coupling clearances, it protects against wear.

Racing Protector is recommended for engines with a few km on the clock, racing engines, straight after running in or after using Sintoflon ET.

If you’re looking to recover play and increase compression, it is best to choose Protector or, for worn in engines, Protector Oilseal.Protector Racing mixes perfectly with Protector.

Use and dosage

  1. SHAKE BEFORE USE;
  2. ensure oil and filter are clean, then with the engine hot, add Protector Racing;
  3. drive for at least 10-20 minutes;
  4. it is best to add after each oil change in order to keep the anti-friction coating intact.

For dirty engines – normally from 30-40 thousand km – performing preventive cleaning with Sintoflon ET or Rapidflush is recommended.

Dosage
Quantity depends on the friction reduction and level of protection required. For medium-sized engines (1000-2000 cc.) 250 ml is recommended as an appropriate dosage.Use a larger dosage to obtain a more marked reduction in friction; for example 400 ml of Protector in 4 kg of oil can reduce friction by 50%. Bikes with a wet clutch: moderate doses, but increase the frequency of treatments, for example 125 ml every oil replacement.

Datasheet

***

LEARN MORE