E.T. ENGINE TREATMENT

ENGINE ANTI-FRICTION TREATMENT FIRST STEP: CLEANING AND COATING

20.70402.60

ET is both a cleaner for the lubricating circuit and an anti-friction coating.
E.T. is produced in packs of:+ 125 ml, 250 ml, 500 ml, 1000 ml, 4000 ml.

ET is both a cleaner for the lubricating circuit and an anti-friction coating.It cleans sludge and filings from surfaces and the lubrication circuit, freeing the hydraulic tappets, segments, ducts, turbo and oil suction pipes:

  • it enables better cleaning of the lubrication circuit, and hence keeps vehicles on the road for longer;
  • does not limit lubricating power of the oil because it drastically reduces friction;
  • covers metals with nanotech PTFE anti-friction layer , making them self-lubricating;
  • increases power and torque.

This protection:

  • decreases the energy absorbed by friction;
  • improving smoothness and performance;
  • decreases oil leakage and fuel consumption..

First engine treatment phase, ideally carried out after 30 – 40,000 km and subsequently at equivalent intervals, especially with vehicles fitted with a particulate filter (see data sheet).

Use and dosage

  1. Treat the engine after running it in;
  2. warm up the engine;
  3. turn the can upside down and shake well;
  4. add to the oil;
  5. run for approximately one hour.

Do not change the oil immediately but use ET for a minimum of 100 / 200 so that the dirt dissolved by the cleaner is removed.Change the oil earlier if the engine is very dirty.

Dosage
depends on engine capacity:

  • up to 6-700 cc – can of 125 ml
  • up to 2000 cc – can of 250 ml
  • up to 4000 cc – 500 ml can
  • up to 8000 cc – 1000 ml can

Datasheet

***

LEARN MORE

You may also like…

  • PROTECTOR RACING

    28.70196.40 ANTI-FRICTION TREATMENT FOR NEW AND RACING ENGINES.PREVENTS WEAR.
  • PROTECTOR OILSEAL

    29.90203.70 ANTI WEAR TREATMENT FOR WORN-OUT ENGINES WITH A HIGH OIL CONSUMPTION.
  • PROTECTOR

    23.20695.40 ENGINE TREATMENT PHASE TWO:CONCENTRATED ANTI-FRICTION